Calidad y pruebas

Quality & Testing for Kids Eyewear

Know what is checked. Confirm what your market needs.

Align the approved sample, inspection checklist and applicable reports before production.

Discuss My Quality Requirements View Checkpoints

Quality Process

Four checkpoints. One agreed standard.

Factory technician checking moulding, finish and assembly of a kids sunglasses frame during production

Inspección en proceso

Review moulding, finish and assembly as work progresses.

Flowcard attached to a production batch tracking model, batch number and production stage

Process tracking

Connect model, batch and production stage with a flowcard.

Quality staff measuring dimensions and checking appearance and assembly against the agreed checklist

Routine checks

Compare dimensions, appearance and assembly with the agreed checklist.

Before dispatch

Check the agreed sample, quantities, assortment and packing.

Inspection scope, sampling method and acceptance criteria are agreed for each order.

Obtener una cotización

Quality Checklist

What should your checklist cover?

Frame and assembly quality check on kids eyewear sample

Frame & assembly

Review dimensions, surface finish, edge condition, hinges, temple movement and lens seating against the approved sample.

Colour and artwork printing check on eyewear component

Colour & artwork

Compare colour reference, print position, legibility and finish on the actual component.

Alcance de la lente

Confirm lens type, tint, intended use and applicable test scope separately from a visual appearance check.

A visual check cannot replace an applicable laboratory report.

Obtener una cotización

Quality documents

Test report excerpts

Preview selected pages from product and raw-material tests. Ask our team for the complete reports for your project. Click any page to enlarge.

Report excerpts
Sunglasses performance testing

AMTRE VERITAS · EN ISO 12312-1:2022+A11:2024

Selected results and transmittance pages for the tested sunglasses sample.
Report excerpts
TPEE raw material: REACH SVHC

SGS · 3 January 2020 · CANEC1925930803

TPEE HW63D sample. Screening summary and selected pages from the tested-substance list.
Report excerpts
TPEE raw material: RoHS & BPA

SGS · 18 May 2022 · NGBHL22001428101

Selected test results and the white plastic grain sample photograph. BPA was not detected at the report's 0.10 mg/kg method detection limit.

These excerpts relate to the samples and test dates shown. Confirm the complete report, exact material or model, and required test scope before ordering.

Tell us your model, material grade and target market so we can share the relevant documents.

Request the full reports

Before Shipment

Agree the release checklist before shipment

Agree what will be checked, how it will be checked and what counts as acceptable before goods leave the factory, so everyone works from the same reference.

Confirm approved sample and revision
Agree inspection scope, sampling method and acceptance criteria
Verify model-colour quantities and pack-out
Review records and resolve deviations before release

Quick answers

Does a photo prove laboratory compliance?: No. Review the applicable report and tested sample scope.
Is every order inspected in full?: Inspection method and scope must be agreed for the order.
What changes need review?: Material, lens, construction, artwork and destination changes may require fresh approval or testing.

Discuss my checklist

Illustrative eyewear reference set beside an unchecked inspection checklist — AI-generated illustration. Inspection scope and acceptance criteria are agreed for each project.